Viewing file:  tvp7002.h (1.43 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/* SPDX-License-Identifier: GPL-2.0-or-later */
/* Texas Instruments Triple 8-/10-BIT 165-/110-MSPS Video and Graphics
* Digitizer with Horizontal PLL registers
*
* Copyright (C) 2009 Texas Instruments Inc
* Author: Santiago Nunez-Corrales <santiago.nunez@ridgerun.com>
*
* This code is partially based upon the TVP5150 driver
* written by Mauro Carvalho Chehab <mchehab@kernel.org>,
* the TVP514x driver written by Vaibhav Hiremath <hvaibhav@ti.com>
* and the TVP7002 driver in the TI LSP 2.10.00.14
*/
#ifndef _TVP7002_H_
#define _TVP7002_H_
#define TVP7002_MODULE_NAME "tvp7002"
/**
* struct tvp7002_config - Platform dependent data
*@clk_polarity: Clock polarity
* 0 - Data clocked out on rising edge of DATACLK signal
* 1 - Data clocked out on falling edge of DATACLK signal
*@hs_polarity: HSYNC polarity
* 0 - Active low HSYNC output, 1 - Active high HSYNC output
*@vs_polarity: VSYNC Polarity
* 0 - Active low VSYNC output, 1 - Active high VSYNC output
*@fid_polarity: Active-high Field ID polarity.
* 0 - The field ID output is set to logic 1 for an odd field
* (field 1) and set to logic 0 for an even field (field 0).
* 1 - Operation with polarity inverted.
*@sog_polarity: Active high Sync on Green output polarity.
* 0 - Normal operation, 1 - Operation with polarity inverted
*/
struct tvp7002_config {
bool clk_polarity;
bool hs_polarity;
bool vs_polarity;
bool fid_polarity;
bool sog_polarity;
};
#endif
|