Viewing file:  pd_vdo.h (7.13 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Copyright 2015-2017 Google, Inc
*/
#ifndef __LINUX_USB_PD_VDO_H
#define __LINUX_USB_PD_VDO_H
#include "pd.h"
/*
* VDO : Vendor Defined Message Object
* VDM object is minimum of VDM header + 6 additional data objects.
*/
#define VDO_MAX_OBJECTS 6
#define VDO_MAX_SIZE (VDO_MAX_OBJECTS + 1)
/*
* VDM header
* ----------
* <31:16> :: SVID
* <15> :: VDM type ( 1b == structured, 0b == unstructured )
* <14:13> :: Structured VDM version (can only be 00 == 1.0 currently)
* <12:11> :: reserved
* <10:8> :: object position (1-7 valid ... used for enter/exit mode only)
* <7:6> :: command type (SVDM only?)
* <5> :: reserved (SVDM), command type (UVDM)
* <4:0> :: command
*/
#define VDO(vid, type, custom) \
(((vid) << 16) | \
((type) << 15) | \
((custom) & 0x7FFF))
#define VDO_SVDM_TYPE (1 << 15)
#define VDO_SVDM_VERS(x) ((x) << 13)
#define VDO_OPOS(x) ((x) << 8)
#define VDO_CMDT(x) ((x) << 6)
#define VDO_OPOS_MASK VDO_OPOS(0x7)
#define VDO_CMDT_MASK VDO_CMDT(0x3)
#define CMDT_INIT 0
#define CMDT_RSP_ACK 1
#define CMDT_RSP_NAK 2
#define CMDT_RSP_BUSY 3
/* reserved for SVDM ... for Google UVDM */
#define VDO_SRC_INITIATOR (0 << 5)
#define VDO_SRC_RESPONDER (1 << 5)
#define CMD_DISCOVER_IDENT 1
#define CMD_DISCOVER_SVID 2
#define CMD_DISCOVER_MODES 3
#define CMD_ENTER_MODE 4
#define CMD_EXIT_MODE 5
#define CMD_ATTENTION 6
#define VDO_CMD_VENDOR(x) (((0x10 + (x)) & 0x1f))
/* ChromeOS specific commands */
#define VDO_CMD_VERSION VDO_CMD_VENDOR(0)
#define VDO_CMD_SEND_INFO VDO_CMD_VENDOR(1)
#define VDO_CMD_READ_INFO VDO_CMD_VENDOR(2)
#define VDO_CMD_REBOOT VDO_CMD_VENDOR(5)
#define VDO_CMD_FLASH_ERASE VDO_CMD_VENDOR(6)
#define VDO_CMD_FLASH_WRITE VDO_CMD_VENDOR(7)
#define VDO_CMD_ERASE_SIG VDO_CMD_VENDOR(8)
#define VDO_CMD_PING_ENABLE VDO_CMD_VENDOR(10)
#define VDO_CMD_CURRENT VDO_CMD_VENDOR(11)
#define VDO_CMD_FLIP VDO_CMD_VENDOR(12)
#define VDO_CMD_GET_LOG VDO_CMD_VENDOR(13)
#define VDO_CMD_CCD_EN VDO_CMD_VENDOR(14)
#define PD_VDO_VID(vdo) ((vdo) >> 16)
#define PD_VDO_SVDM(vdo) (((vdo) >> 15) & 1)
#define PD_VDO_OPOS(vdo) (((vdo) >> 8) & 0x7)
#define PD_VDO_CMD(vdo) ((vdo) & 0x1f)
#define PD_VDO_CMDT(vdo) (((vdo) >> 6) & 0x3)
/*
* SVDM Identity request -> response
*
* Request is simply properly formatted SVDM header
*
* Response is 4 data objects:
* [0] :: SVDM header
* [1] :: Identitiy header
* [2] :: Cert Stat VDO
* [3] :: (Product | Cable) VDO
* [4] :: AMA VDO
*
*/
#define VDO_INDEX_HDR 0
#define VDO_INDEX_IDH 1
#define VDO_INDEX_CSTAT 2
#define VDO_INDEX_CABLE 3
#define VDO_INDEX_PRODUCT 3
#define VDO_INDEX_AMA 4
/*
* SVDM Identity Header
* --------------------
* <31> :: data capable as a USB host
* <30> :: data capable as a USB device
* <29:27> :: product type
* <26> :: modal operation supported (1b == yes)
* <25:16> :: Reserved, Shall be set to zero
* <15:0> :: USB-IF assigned VID for this cable vendor
*/
#define IDH_PTYPE_UNDEF 0
#define IDH_PTYPE_HUB 1
#define IDH_PTYPE_PERIPH 2
#define IDH_PTYPE_PCABLE 3
#define IDH_PTYPE_ACABLE 4
#define IDH_PTYPE_AMA 5
#define VDO_IDH(usbh, usbd, ptype, is_modal, vid) \
((usbh) << 31 | (usbd) << 30 | ((ptype) & 0x7) << 27 \
| (is_modal) << 26 | ((vid) & 0xffff))
#define PD_IDH_PTYPE(vdo) (((vdo) >> 27) & 0x7)
#define PD_IDH_VID(vdo) ((vdo) & 0xffff)
#define PD_IDH_MODAL_SUPP(vdo) ((vdo) & (1 << 26))
/*
* Cert Stat VDO
* -------------
* <31:0> : USB-IF assigned XID for this cable
*/
#define PD_CSTAT_XID(vdo) (vdo)
/*
* Product VDO
* -----------
* <31:16> : USB Product ID
* <15:0> : USB bcdDevice
*/
#define VDO_PRODUCT(pid, bcd) (((pid) & 0xffff) << 16 | ((bcd) & 0xffff))
#define PD_PRODUCT_PID(vdo) (((vdo) >> 16) & 0xffff)
/*
* Cable VDO
* ---------
* <31:28> :: Cable HW version
* <27:24> :: Cable FW version
* <23:20> :: Reserved, Shall be set to zero
* <19:18> :: type-C to Type-A/B/C (00b == A, 01 == B, 10 == C)
* <17> :: Type-C to Plug/Receptacle (0b == plug, 1b == receptacle)
* <16:13> :: cable latency (0001 == <10ns(~1m length))
* <12:11> :: cable termination type (11b == both ends active VCONN req)
* <10> :: SSTX1 Directionality support (0b == fixed, 1b == cfgable)
* <9> :: SSTX2 Directionality support
* <8> :: SSRX1 Directionality support
* <7> :: SSRX2 Directionality support
* <6:5> :: Vbus current handling capability
* <4> :: Vbus through cable (0b == no, 1b == yes)
* <3> :: SOP" controller present? (0b == no, 1b == yes)
* <2:0> :: USB SS Signaling support
*/
#define CABLE_ATYPE 0
#define CABLE_BTYPE 1
#define CABLE_CTYPE 2
#define CABLE_PLUG 0
#define CABLE_RECEPTACLE 1
#define CABLE_CURR_1A5 0
#define CABLE_CURR_3A 1
#define CABLE_CURR_5A 2
#define CABLE_USBSS_U2_ONLY 0
#define CABLE_USBSS_U31_GEN1 1
#define CABLE_USBSS_U31_GEN2 2
#define VDO_CABLE(hw, fw, cbl, gdr, lat, term, tx1d, tx2d, rx1d, rx2d, cur,\
vps, sopp, usbss) \
(((hw) & 0x7) << 28 | ((fw) & 0x7) << 24 | ((cbl) & 0x3) << 18 \
| (gdr) << 17 | ((lat) & 0x7) << 13 | ((term) & 0x3) << 11 \
| (tx1d) << 10 | (tx2d) << 9 | (rx1d) << 8 | (rx2d) << 7 \
| ((cur) & 0x3) << 5 | (vps) << 4 | (sopp) << 3 \
| ((usbss) & 0x7))
/*
* AMA VDO
* ---------
* <31:28> :: Cable HW version
* <27:24> :: Cable FW version
* <23:12> :: Reserved, Shall be set to zero
* <11> :: SSTX1 Directionality support (0b == fixed, 1b == cfgable)
* <10> :: SSTX2 Directionality support
* <9> :: SSRX1 Directionality support
* <8> :: SSRX2 Directionality support
* <7:5> :: Vconn power
* <4> :: Vconn power required
* <3> :: Vbus power required
* <2:0> :: USB SS Signaling support
*/
#define VDO_AMA(hw, fw, tx1d, tx2d, rx1d, rx2d, vcpwr, vcr, vbr, usbss) \
(((hw) & 0x7) << 28 | ((fw) & 0x7) << 24 \
| (tx1d) << 11 | (tx2d) << 10 | (rx1d) << 9 | (rx2d) << 8 \
| ((vcpwr) & 0x7) << 5 | (vcr) << 4 | (vbr) << 3 \
| ((usbss) & 0x7))
#define PD_VDO_AMA_VCONN_REQ(vdo) (((vdo) >> 4) & 1)
#define PD_VDO_AMA_VBUS_REQ(vdo) (((vdo) >> 3) & 1)
#define AMA_VCONN_PWR_1W 0
#define AMA_VCONN_PWR_1W5 1
#define AMA_VCONN_PWR_2W 2
#define AMA_VCONN_PWR_3W 3
#define AMA_VCONN_PWR_4W 4
#define AMA_VCONN_PWR_5W 5
#define AMA_VCONN_PWR_6W 6
#define AMA_USBSS_U2_ONLY 0
#define AMA_USBSS_U31_GEN1 1
#define AMA_USBSS_U31_GEN2 2
#define AMA_USBSS_BBONLY 3
/*
* SVDM Discover SVIDs request -> response
*
* Request is properly formatted VDM Header with discover SVIDs command.
* Response is a set of SVIDs of all all supported SVIDs with all zero's to
* mark the end of SVIDs. If more than 12 SVIDs are supported command SHOULD be
* repeated.
*/
#define VDO_SVID(svid0, svid1) (((svid0) & 0xffff) << 16 | ((svid1) & 0xffff))
#define PD_VDO_SVID_SVID0(vdo) ((vdo) >> 16)
#define PD_VDO_SVID_SVID1(vdo) ((vdo) & 0xffff)
/* USB-IF SIDs */
#define USB_SID_PD 0xff00 /* power delivery */
#define USB_SID_DISPLAYPORT 0xff01
#define USB_SID_MHL 0xff02 /* Mobile High-Definition Link */
/* VDM command timeouts (in ms) */
#define PD_T_VDM_UNSTRUCTURED 500
#define PD_T_VDM_BUSY 100
#define PD_T_VDM_WAIT_MODE_E 100
#define PD_T_VDM_SNDR_RSP 30
#define PD_T_VDM_E_MODE 25
#define PD_T_VDM_RCVR_RSP 15
#endif /* __LINUX_USB_PD_VDO_H */
|