Viewing file:  cacheflush.h (3.9 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
*/
#ifndef _ASM_POWERPC_CACHEFLUSH_H
#define _ASM_POWERPC_CACHEFLUSH_H
#ifdef __KERNEL__
#include <linux/mm.h>
#include <asm/cputable.h>
/*
* No cache flushing is required when address mappings are changed,
* because the caches on PowerPCs are physically addressed.
*/
#define flush_cache_all() do { } while (0)
#define flush_cache_mm(mm) do { } while (0)
#define flush_cache_dup_mm(mm) do { } while (0)
#define flush_cache_range(vma, start, end) do { } while (0)
#define flush_cache_page(vma, vmaddr, pfn) do { } while (0)
#define flush_icache_page(vma, page) do { } while (0)
#define flush_cache_vunmap(start, end) do { } while (0)
#ifdef CONFIG_PPC_BOOK3S_64
/*
* Book3s has no ptesync after setting a pte, so without this ptesync it's
* possible for a kernel virtual mapping access to return a spurious fault
* if it's accessed right after the pte is set. The page fault handler does
* not expect this type of fault. flush_cache_vmap is not exactly the right
* place to put this, but it seems to work well enough.
*/
static inline void flush_cache_vmap(unsigned long start, unsigned long end)
{
asm volatile("ptesync" ::: "memory");
}
#else
static inline void flush_cache_vmap(unsigned long start, unsigned long end) { }
#endif
#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
extern void flush_dcache_page(struct page *page);
#define flush_dcache_mmap_lock(mapping) do { } while (0)
#define flush_dcache_mmap_unlock(mapping) do { } while (0)
void flush_icache_range(unsigned long start, unsigned long stop);
extern void flush_icache_user_range(struct vm_area_struct *vma,
struct page *page, unsigned long addr,
int len);
extern void flush_dcache_icache_page(struct page *page);
void __flush_dcache_icache(void *page);
/**
* flush_dcache_range(): Write any modified data cache blocks out to memory and
* invalidate them. Does not invalidate the corresponding instruction cache
* blocks.
*
* @start: the start address
* @stop: the stop address (exclusive)
*/
static inline void flush_dcache_range(unsigned long start, unsigned long stop)
{
unsigned long shift = l1_dcache_shift();
unsigned long bytes = l1_dcache_bytes();
void *addr = (void *)(start & ~(bytes - 1));
unsigned long size = stop - (unsigned long)addr + (bytes - 1);
unsigned long i;
if (IS_ENABLED(CONFIG_PPC64)) {
mb(); /* sync */
isync();
}
for (i = 0; i < size >> shift; i++, addr += bytes)
dcbf(addr);
mb(); /* sync */
if (IS_ENABLED(CONFIG_PPC64))
isync();
}
/*
* Write any modified data cache blocks out to memory.
* Does not invalidate the corresponding cache lines (especially for
* any corresponding instruction cache).
*/
static inline void clean_dcache_range(unsigned long start, unsigned long stop)
{
unsigned long shift = l1_dcache_shift();
unsigned long bytes = l1_dcache_bytes();
void *addr = (void *)(start & ~(bytes - 1));
unsigned long size = stop - (unsigned long)addr + (bytes - 1);
unsigned long i;
for (i = 0; i < size >> shift; i++, addr += bytes)
dcbst(addr);
mb(); /* sync */
}
/*
* Like above, but invalidate the D-cache. This is used by the 8xx
* to invalidate the cache so the PPC core doesn't get stale data
* from the CPM (no cache snooping here :-).
*/
static inline void invalidate_dcache_range(unsigned long start,
unsigned long stop)
{
unsigned long shift = l1_dcache_shift();
unsigned long bytes = l1_dcache_bytes();
void *addr = (void *)(start & ~(bytes - 1));
unsigned long size = stop - (unsigned long)addr + (bytes - 1);
unsigned long i;
for (i = 0; i < size >> shift; i++, addr += bytes)
dcbi(addr);
mb(); /* sync */
}
#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
do { \
memcpy(dst, src, len); \
flush_icache_user_range(vma, page, vaddr, len); \
} while (0)
#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
memcpy(dst, src, len)
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_CACHEFLUSH_H */
|