Viewing file:  pgtable.h (11.46 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _ASM_POWERPC_NOHASH_32_PGTABLE_H
#define _ASM_POWERPC_NOHASH_32_PGTABLE_H
#define __ARCH_USE_5LEVEL_HACK
#include <asm-generic/pgtable-nopmd.h>
#ifndef __ASSEMBLY__
#include <linux/sched.h>
#include <linux/threads.h>
#include <asm/mmu.h> /* For sub-arch specific PPC_PIN_SIZE */
#include <asm/asm-405.h>
#ifdef CONFIG_44x
extern int icache_44x_need_flush;
#endif
#endif /* __ASSEMBLY__ */
#define PTE_INDEX_SIZE PTE_SHIFT
#define PMD_INDEX_SIZE 0
#define PUD_INDEX_SIZE 0
#define PGD_INDEX_SIZE (32 - PGDIR_SHIFT)
#define PMD_CACHE_INDEX PMD_INDEX_SIZE
#define PUD_CACHE_INDEX PUD_INDEX_SIZE
#ifndef __ASSEMBLY__
#define PTE_TABLE_SIZE (sizeof(pte_t) << PTE_INDEX_SIZE)
#define PMD_TABLE_SIZE 0
#define PUD_TABLE_SIZE 0
#define PGD_TABLE_SIZE (sizeof(pgd_t) << PGD_INDEX_SIZE)
#endif /* __ASSEMBLY__ */
#define PTRS_PER_PTE (1 << PTE_INDEX_SIZE)
#define PTRS_PER_PGD (1 << PGD_INDEX_SIZE)
/*
* The normal case is that PTEs are 32-bits and we have a 1-page
* 1024-entry pgdir pointing to 1-page 1024-entry PTE pages. -- paulus
*
* For any >32-bit physical address platform, we can use the following
* two level page table layout where the pgdir is 8KB and the MS 13 bits
* are an index to the second level table. The combined pgdir/pmd first
* level has 2048 entries and the second level has 512 64-bit PTE entries.
* -Matt
*/
/* PGDIR_SHIFT determines what a top-level page table entry can map */
#define PGDIR_SHIFT (PAGE_SHIFT + PTE_INDEX_SIZE)
#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
#define PGDIR_MASK (~(PGDIR_SIZE-1))
/* Bits to mask out from a PGD to get to the PUD page */
#define PGD_MASKED_BITS 0
#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE)
#define FIRST_USER_ADDRESS 0UL
#define pte_ERROR(e) \
pr_err("%s:%d: bad pte %llx.\n", __FILE__, __LINE__, \
(unsigned long long)pte_val(e))
#define pgd_ERROR(e) \
pr_err("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
#ifndef __ASSEMBLY__
int map_kernel_page(unsigned long va, phys_addr_t pa, pgprot_t prot);
#endif /* !__ASSEMBLY__ */
/*
* This is the bottom of the PKMAP area with HIGHMEM or an arbitrary
* value (for now) on others, from where we can start layout kernel
* virtual space that goes below PKMAP and FIXMAP
*/
#include <asm/fixmap.h>
/*
* ioremap_bot starts at that address. Early ioremaps move down from there,
* until mem_init() at which point this becomes the top of the vmalloc
* and ioremap space
*/
#ifdef CONFIG_HIGHMEM
#define IOREMAP_TOP PKMAP_BASE
#else
#define IOREMAP_TOP FIXADDR_START
#endif
/* PPC32 shares vmalloc area with ioremap */
#define IOREMAP_START VMALLOC_START
#define IOREMAP_END VMALLOC_END
/*
* Just any arbitrary offset to the start of the vmalloc VM area: the
* current 16MB value just means that there will be a 64MB "hole" after the
* physical memory until the kernel virtual memory starts. That means that
* any out-of-bounds memory accesses will hopefully be caught.
* The vmalloc() routines leaves a hole of 4kB between each vmalloced
* area for the same reason. ;)
*
* We no longer map larger than phys RAM with the BATs so we don't have
* to worry about the VMALLOC_OFFSET causing problems. We do have to worry
* about clashes between our early calls to ioremap() that start growing down
* from IOREMAP_TOP being run into the VM area allocations (growing upwards
* from VMALLOC_START). For this reason we have ioremap_bot to check when
* we actually run into our mappings setup in the early boot with the VM
* system. This really does become a problem for machines with good amounts
* of RAM. -- Cort
*/
#define VMALLOC_OFFSET (0x1000000) /* 16M */
#ifdef PPC_PIN_SIZE
#define VMALLOC_START (((_ALIGN((long)high_memory, PPC_PIN_SIZE) + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)))
#else
#define VMALLOC_START ((((long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)))
#endif
#define VMALLOC_END ioremap_bot
/*
* Bits in a linux-style PTE. These match the bits in the
* (hardware-defined) PowerPC PTE as closely as possible.
*/
#if defined(CONFIG_40x)
#include <asm/nohash/32/pte-40x.h>
#elif defined(CONFIG_44x)
#include <asm/nohash/32/pte-44x.h>
#elif defined(CONFIG_FSL_BOOKE) && defined(CONFIG_PTE_64BIT)
#include <asm/nohash/pte-book3e.h>
#elif defined(CONFIG_FSL_BOOKE)
#include <asm/nohash/32/pte-fsl-booke.h>
#elif defined(CONFIG_PPC_8xx)
#include <asm/nohash/32/pte-8xx.h>
#endif
/*
* Location of the PFN in the PTE. Most 32-bit platforms use the same
* as _PAGE_SHIFT here (ie, naturally aligned).
* Platform who don't just pre-define the value so we don't override it here.
*/
#ifndef PTE_RPN_SHIFT
#define PTE_RPN_SHIFT (PAGE_SHIFT)
#endif
/*
* The mask covered by the RPN must be a ULL on 32-bit platforms with
* 64-bit PTEs.
*/
#if defined(CONFIG_PPC32) && defined(CONFIG_PTE_64BIT)
#define PTE_RPN_MASK (~((1ULL << PTE_RPN_SHIFT) - 1))
#define MAX_POSSIBLE_PHYSMEM_BITS 36
#else
#define PTE_RPN_MASK (~((1UL << PTE_RPN_SHIFT) - 1))
#define MAX_POSSIBLE_PHYSMEM_BITS 32
#endif
/*
* _PAGE_CHG_MASK masks of bits that are to be preserved across
* pgprot changes.
*/
#define _PAGE_CHG_MASK (PTE_RPN_MASK | _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_SPECIAL)
#ifndef __ASSEMBLY__
#define pte_clear(mm, addr, ptep) \
do { pte_update(ptep, ~0, 0); } while (0)
#ifndef pte_mkwrite
static inline pte_t pte_mkwrite(pte_t pte)
{
return __pte(pte_val(pte) | _PAGE_RW);
}
#endif
static inline pte_t pte_mkdirty(pte_t pte)
{
return __pte(pte_val(pte) | _PAGE_DIRTY);
}
static inline pte_t pte_mkyoung(pte_t pte)
{
return __pte(pte_val(pte) | _PAGE_ACCESSED);
}
#ifndef pte_wrprotect
static inline pte_t pte_wrprotect(pte_t pte)
{
return __pte(pte_val(pte) & ~_PAGE_RW);
}
#endif
static inline pte_t pte_mkexec(pte_t pte)
{
return __pte(pte_val(pte) | _PAGE_EXEC);
}
#define pmd_none(pmd) (!pmd_val(pmd))
#define pmd_bad(pmd) (pmd_val(pmd) & _PMD_BAD)
#define pmd_present(pmd) (pmd_val(pmd) & _PMD_PRESENT_MASK)
static inline void pmd_clear(pmd_t *pmdp)
{
*pmdp = __pmd(0);
}
/*
* PTE updates. This function is called whenever an existing
* valid PTE is updated. This does -not- include set_pte_at()
* which nowadays only sets a new PTE.
*
* Depending on the type of MMU, we may need to use atomic updates
* and the PTE may be either 32 or 64 bit wide. In the later case,
* when using atomic updates, only the low part of the PTE is
* accessed atomically.
*
* In addition, on 44x, we also maintain a global flag indicating
* that an executable user mapping was modified, which is needed
* to properly flush the virtually tagged instruction cache of
* those implementations.
*/
#ifndef CONFIG_PTE_64BIT
static inline unsigned long pte_update(pte_t *p,
unsigned long clr,
unsigned long set)
{
#ifdef PTE_ATOMIC_UPDATES
unsigned long old, tmp;
__asm__ __volatile__("\
1: lwarx %0,0,%3\n\
andc %1,%0,%4\n\
or %1,%1,%5\n"
PPC405_ERR77(0,%3)
" stwcx. %1,0,%3\n\
bne- 1b"
: "=&r" (old), "=&r" (tmp), "=m" (*p)
: "r" (p), "r" (clr), "r" (set), "m" (*p)
: "cc" );
#else /* PTE_ATOMIC_UPDATES */
unsigned long old = pte_val(*p);
unsigned long new = (old & ~clr) | set;
#if defined(CONFIG_PPC_8xx) && defined(CONFIG_PPC_16K_PAGES)
p->pte = p->pte1 = p->pte2 = p->pte3 = new;
#else
*p = __pte(new);
#endif
#endif /* !PTE_ATOMIC_UPDATES */
#ifdef CONFIG_44x
if ((old & _PAGE_USER) && (old & _PAGE_EXEC))
icache_44x_need_flush = 1;
#endif
return old;
}
#else /* CONFIG_PTE_64BIT */
static inline unsigned long long pte_update(pte_t *p,
unsigned long clr,
unsigned long set)
{
#ifdef PTE_ATOMIC_UPDATES
unsigned long long old;
unsigned long tmp;
__asm__ __volatile__("\
1: lwarx %L0,0,%4\n\
lwzx %0,0,%3\n\
andc %1,%L0,%5\n\
or %1,%1,%6\n"
PPC405_ERR77(0,%3)
" stwcx. %1,0,%4\n\
bne- 1b"
: "=&r" (old), "=&r" (tmp), "=m" (*p)
: "r" (p), "r" ((unsigned long)(p) + 4), "r" (clr), "r" (set), "m" (*p)
: "cc" );
#else /* PTE_ATOMIC_UPDATES */
unsigned long long old = pte_val(*p);
*p = __pte((old & ~(unsigned long long)clr) | set);
#endif /* !PTE_ATOMIC_UPDATES */
#ifdef CONFIG_44x
if ((old & _PAGE_USER) && (old & _PAGE_EXEC))
icache_44x_need_flush = 1;
#endif
return old;
}
#endif /* CONFIG_PTE_64BIT */
#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
static inline int __ptep_test_and_clear_young(unsigned int context, unsigned long addr, pte_t *ptep)
{
unsigned long old;
old = pte_update(ptep, _PAGE_ACCESSED, 0);
return (old & _PAGE_ACCESSED) != 0;
}
#define ptep_test_and_clear_young(__vma, __addr, __ptep) \
__ptep_test_and_clear_young((__vma)->vm_mm->context.id, __addr, __ptep)
#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
pte_t *ptep)
{
return __pte(pte_update(ptep, ~0, 0));
}
#define __HAVE_ARCH_PTEP_SET_WRPROTECT
static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
pte_t *ptep)
{
unsigned long clr = ~pte_val(pte_wrprotect(__pte(~0)));
unsigned long set = pte_val(pte_wrprotect(__pte(0)));
pte_update(ptep, clr, set);
}
static inline void __ptep_set_access_flags(struct vm_area_struct *vma,
pte_t *ptep, pte_t entry,
unsigned long address,
int psize)
{
pte_t pte_set = pte_mkyoung(pte_mkdirty(pte_mkwrite(pte_mkexec(__pte(0)))));
pte_t pte_clr = pte_mkyoung(pte_mkdirty(pte_mkwrite(pte_mkexec(__pte(~0)))));
unsigned long set = pte_val(entry) & pte_val(pte_set);
unsigned long clr = ~pte_val(entry) & ~pte_val(pte_clr);
pte_update(ptep, clr, set);
flush_tlb_page(vma, address);
}
static inline int pte_young(pte_t pte)
{
return pte_val(pte) & _PAGE_ACCESSED;
}
#define __HAVE_ARCH_PTE_SAME
#define pte_same(A,B) ((pte_val(A) ^ pte_val(B)) == 0)
/*
* Note that on Book E processors, the pmd contains the kernel virtual
* (lowmem) address of the pte page. The physical address is less useful
* because everything runs with translation enabled (even the TLB miss
* handler). On everything else the pmd contains the physical address
* of the pte page. -- paulus
*/
#ifndef CONFIG_BOOKE
#define pmd_page_vaddr(pmd) \
((unsigned long)__va(pmd_val(pmd) & ~(PTE_TABLE_SIZE - 1)))
#define pmd_page(pmd) \
pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT)
#else
#define pmd_page_vaddr(pmd) \
((unsigned long)(pmd_val(pmd) & ~(PTE_TABLE_SIZE - 1)))
#define pmd_page(pmd) \
pfn_to_page((__pa(pmd_val(pmd)) >> PAGE_SHIFT))
#endif
/* to find an entry in a kernel page-table-directory */
#define pgd_offset_k(address) pgd_offset(&init_mm, address)
/* to find an entry in a page-table-directory */
#define pgd_index(address) ((address) >> PGDIR_SHIFT)
#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
/* Find an entry in the third-level page table.. */
#define pte_index(address) \
(((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
#define pte_offset_kernel(dir, addr) \
(pmd_bad(*(dir)) ? NULL : (pte_t *)pmd_page_vaddr(*(dir)) + \
pte_index(addr))
#define pte_offset_map(dir, addr) \
((pte_t *)(kmap_atomic(pmd_page(*(dir))) + \
(pmd_page_vaddr(*(dir)) & ~PAGE_MASK)) + pte_index(addr))
#define pte_unmap(pte) kunmap_atomic(pte)
/*
* Encode and decode a swap entry.
* Note that the bits we use in a PTE for representing a swap entry
* must not include the _PAGE_PRESENT bit.
* -- paulus
*/
#define __swp_type(entry) ((entry).val & 0x1f)
#define __swp_offset(entry) ((entry).val >> 5)
#define __swp_entry(type, offset) ((swp_entry_t) { (type) | ((offset) << 5) })
#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) >> 3 })
#define __swp_entry_to_pte(x) ((pte_t) { (x).val << 3 })
#endif /* !__ASSEMBLY__ */
#endif /* __ASM_POWERPC_NOHASH_32_PGTABLE_H */
|