Viewing file:  Instances.php (69.95 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
<?php
/*
* Copyright 2014 Google Inc.
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may not
* use this file except in compliance with the License. You may obtain a copy of
* the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations under
* the License.
*/
/**
* The "instances" collection of methods.
* Typical usage is:
* <code>
* $computeService = new Google_Service_Compute(...);
* $instances = $computeService->instances;
* </code>
*/
class Google_Service_Compute_Resource_Instances extends Google_Service_Resource
{
/**
* Adds an access config to an instance's network interface.
* (instances.addAccessConfig)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance The instance name for this request.
* @param string $networkInterface The name of the network interface to add to
* this instance.
* @param Google_Service_Compute_AccessConfig $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Google_Service_Compute_Operation
*/
public function addAccessConfig($project, $zone, $instance, $networkInterface, Google_Service_Compute_AccessConfig $postBody, $optParams = array())
{
$params = array('project' => $project, 'zone' => $zone, 'instance' => $instance, 'networkInterface' => $networkInterface, 'postBody' => $postBody);
$params = array_merge($params, $optParams);
return $this->call('addAccessConfig', array($params), "Google_Service_Compute_Operation");
}
/**
* Adds existing resource policies to an instance. You can only add one policy
* right now which will be applied to this instance for scheduling live
* migrations. (instances.addResourcePolicies)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance The instance name for this request.
* @param Google_Service_Compute_InstancesAddResourcePoliciesRequest $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Google_Service_Compute_Operation
*/
public function addResourcePolicies($project, $zone, $instance, Google_Service_Compute_InstancesAddResourcePoliciesRequest $postBody, $optParams = array())
{
$params = array('project' => $project, 'zone' => $zone, 'instance' => $instance, 'postBody' => $postBody);
$params = array_merge($params, $optParams);
return $this->call('addResourcePolicies', array($params), "Google_Service_Compute_Operation");
}
/**
* Retrieves aggregated list of all of the instances in your project across all
* regions and zones. (instances.aggregatedList)
*
* @param string $project Project ID for this request.
* @param array $optParams Optional parameters.
*
* @opt_param string filter A filter expression that filters resources listed in
* the response. The expression must specify the field name, a comparison
* operator, and the value that you want to use for filtering. The value must be
* a string, a number, or a boolean. The comparison operator must be either `=`,
* `!=`, `>`, or `<`.
*
* For example, if you are filtering Compute Engine instances, you can exclude
* instances named `example-instance` by specifying `name != example-instance`.
*
* You can also filter nested fields. For example, you could specify
* `scheduling.automaticRestart = false` to include instances only if they are
* not scheduled for automatic restarts. You can use filtering on nested fields
* to filter based on resource labels.
*
* To filter on multiple expressions, provide each separate expression within
* parentheses. For example: ``` (scheduling.automaticRestart = true)
* (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND`
* expression. However, you can include `AND` and `OR` expressions explicitly.
* For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel
* Broadwell") AND (scheduling.automaticRestart = true) ```
* @opt_param bool includeAllScopes Indicates whether every visible scope for
* each scope type (zone, region, global) should be included in the response.
* For new resource types added after this field, the flag has no effect as new
* resource types will always include every visible scope for each scope type in
* response. For resource types which predate this field, if this flag is
* omitted or false, only scopes of the scope types where the resource type is
* expected to be found will be included.
* @opt_param string maxResults The maximum number of results per page that
* should be returned. If the number of available results is larger than
* `maxResults`, Compute Engine returns a `nextPageToken` that can be used to
* get the next page of results in subsequent list requests. Acceptable values
* are `0` to `500`, inclusive. (Default: `500`)
* @opt_param string orderBy Sorts list results by a certain order. By default,
* results are returned in alphanumerical order based on the resource name.
*
* You can also sort results in descending order based on the creation timestamp
* using `orderBy="creationTimestamp desc"`. This sorts results based on the
* `creationTimestamp` field in reverse chronological order (newest result
* first). Use this to sort resources like operations so that the newest
* operation is returned first.
*
* Currently, only sorting by `name` or `creationTimestamp desc` is supported.
* @opt_param string pageToken Specifies a page token to use. Set `pageToken` to
* the `nextPageToken` returned by a previous list request to get the next page
* of results.
* @opt_param bool returnPartialSuccess Opt-in for partial success behavior
* which provides partial results in case of failure. The default value is
* false.
* @return Google_Service_Compute_InstanceAggregatedList
*/
public function aggregatedList($project, $optParams = array())
{
$params = array('project' => $project);
$params = array_merge($params, $optParams);
return $this->call('aggregatedList', array($params), "Google_Service_Compute_InstanceAggregatedList");
}
/**
* Attaches an existing Disk resource to an instance. You must first create the
* disk before you can attach it. It is not possible to create and attach a disk
* at the same time. For more information, read Adding a persistent disk to your
* instance. (instances.attachDisk)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance The instance name for this request.
* @param Google_Service_Compute_AttachedDisk $postBody
* @param array $optParams Optional parameters.
*
* @opt_param bool forceAttach Whether to force attach the regional disk even if
* it's currently attached to another instance. If you try to force attach a
* zonal disk to an instance, you will receive an error.
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Google_Service_Compute_Operation
*/
public function attachDisk($project, $zone, $instance, Google_Service_Compute_AttachedDisk $postBody, $optParams = array())
{
$params = array('project' => $project, 'zone' => $zone, 'instance' => $instance, 'postBody' => $postBody);
$params = array_merge($params, $optParams);
return $this->call('attachDisk', array($params), "Google_Service_Compute_Operation");
}
/**
* Creates multiple instances. Count specifies the number of instances to
* create. (instances.bulkInsert)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param Google_Service_Compute_BulkInsertInstanceResource $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Google_Service_Compute_Operation
*/
public function bulkInsert($project, $zone, Google_Service_Compute_BulkInsertInstanceResource $postBody, $optParams = array())
{
$params = array('project' => $project, 'zone' => $zone, 'postBody' => $postBody);
$params = array_merge($params, $optParams);
return $this->call('bulkInsert', array($params), "Google_Service_Compute_Operation");
}
/**
* Deletes the specified Instance resource. For more information, see Deleting
* an instance. (instances.delete)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name of the instance resource to delete.
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Google_Service_Compute_Operation
*/
public function delete($project, $zone, $instance, $optParams = array())
{
$params = array('project' => $project, 'zone' => $zone, 'instance' => $instance);
$params = array_merge($params, $optParams);
return $this->call('delete', array($params), "Google_Service_Compute_Operation");
}
/**
* Deletes an access config from an instance's network interface.
* (instances.deleteAccessConfig)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance The instance name for this request.
* @param string $accessConfig The name of the access config to delete.
* @param string $networkInterface The name of the network interface.
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Google_Service_Compute_Operation
*/
public function deleteAccessConfig($project, $zone, $instance, $accessConfig, $networkInterface, $optParams = array())
{
$params = array('project' => $project, 'zone' => $zone, 'instance' => $instance, 'accessConfig' => $accessConfig, 'networkInterface' => $networkInterface);
$params = array_merge($params, $optParams);
return $this->call('deleteAccessConfig', array($params), "Google_Service_Compute_Operation");
}
/**
* Detaches a disk from an instance. (instances.detachDisk)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Instance name for this request.
* @param string $deviceName The device name of the disk to detach. Make a get()
* request on the instance to view currently attached disks and device names.
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Google_Service_Compute_Operation
*/
public function detachDisk($project, $zone, $instance, $deviceName, $optParams = array())
{
$params = array('project' => $project, 'zone' => $zone, 'instance' => $instance, 'deviceName' => $deviceName);
$params = array_merge($params, $optParams);
return $this->call('detachDisk', array($params), "Google_Service_Compute_Operation");
}
/**
* Returns the specified Instance resource. Gets a list of available instances
* by making a list() request. (instances.get)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name of the instance resource to return.
* @param array $optParams Optional parameters.
* @return Google_Service_Compute_Instance
*/
public function get($project, $zone, $instance, $optParams = array())
{
$params = array('project' => $project, 'zone' => $zone, 'instance' => $instance);
$params = array_merge($params, $optParams);
return $this->call('get', array($params), "Google_Service_Compute_Instance");
}
/**
* Returns effective firewalls applied to an interface of the instance.
* (instances.getEffectiveFirewalls)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name of the instance scoping this request.
* @param string $networkInterface The name of the network interface to get the
* effective firewalls.
* @param array $optParams Optional parameters.
* @return Google_Service_Compute_InstancesGetEffectiveFirewallsResponse
*/
public function getEffectiveFirewalls($project, $zone, $instance, $networkInterface, $optParams = array())
{
$params = array('project' => $project, 'zone' => $zone, 'instance' => $instance, 'networkInterface' => $networkInterface);
$params = array_merge($params, $optParams);
return $this->call('getEffectiveFirewalls', array($params), "Google_Service_Compute_InstancesGetEffectiveFirewallsResponse");
}
/**
* Returns the specified guest attributes entry. (instances.getGuestAttributes)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name of the instance scoping this request.
* @param array $optParams Optional parameters.
*
* @opt_param string queryPath Specifies the guest attributes path to be
* queried.
* @opt_param string variableKey Specifies the key for the guest attributes
* entry.
* @return Google_Service_Compute_GuestAttributes
*/
public function getGuestAttributes($project, $zone, $instance, $optParams = array())
{
$params = array('project' => $project, 'zone' => $zone, 'instance' => $instance);
$params = array_merge($params, $optParams);
return $this->call('getGuestAttributes', array($params), "Google_Service_Compute_GuestAttributes");
}
/**
* Gets the access control policy for a resource. May be empty if no such policy
* or resource exists. (instances.getIamPolicy)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $resource Name or id of the resource for this request.
* @param array $optParams Optional parameters.
*
* @opt_param int optionsRequestedPolicyVersion Requested IAM Policy version.
* @return Google_Service_Compute_Policy
*/
public function getIamPolicy($project, $zone, $resource, $optParams = array())
{
$params = array('project' => $project, 'zone' => $zone, 'resource' => $resource);
$params = array_merge($params, $optParams);
return $this->call('getIamPolicy', array($params), "Google_Service_Compute_Policy");
}
/**
* Returns the screenshot from the specified instance. (instances.getScreenshot)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name of the instance scoping this request.
* @param array $optParams Optional parameters.
* @return Google_Service_Compute_Screenshot
*/
public function getScreenshot($project, $zone, $instance, $optParams = array())
{
$params = array('project' => $project, 'zone' => $zone, 'instance' => $instance);
$params = array_merge($params, $optParams);
return $this->call('getScreenshot', array($params), "Google_Service_Compute_Screenshot");
}
/**
* Returns the last 1 MB of serial port output from the specified instance.
* (instances.getSerialPortOutput)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name of the instance for this request.
* @param array $optParams Optional parameters.
*
* @opt_param int port Specifies which COM or serial port to retrieve data from.
* @opt_param string start Specifies the starting byte position of the output to
* return. To start with the first byte of output to the specified port, omit
* this field or set it to `0`.
*
* If the output for that byte position is available, this field matches the
* `start` parameter sent with the request. If the amount of serial console
* output exceeds the size of the buffer (1 MB), the oldest output is discarded
* and is no longer available. If the requested start position refers to
* discarded output, the start position is adjusted to the oldest output still
* available, and the adjusted start position is returned as the `start`
* property value.
*
* You can also provide a negative start position, which translates to the most
* recent number of bytes written to the serial port. For example, -3 is
* interpreted as the most recent 3 bytes written to the serial console.
* @return Google_Service_Compute_SerialPortOutput
*/
public function getSerialPortOutput($project, $zone, $instance, $optParams = array())
{
$params = array('project' => $project, 'zone' => $zone, 'instance' => $instance);
$params = array_merge($params, $optParams);
return $this->call('getSerialPortOutput', array($params), "Google_Service_Compute_SerialPortOutput");
}
/**
* Returns the Shielded Instance Identity of an instance
* (instances.getShieldedInstanceIdentity)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name or id of the instance scoping this request.
* @param array $optParams Optional parameters.
* @return Google_Service_Compute_ShieldedInstanceIdentity
*/
public function getShieldedInstanceIdentity($project, $zone, $instance, $optParams = array())
{
$params = array('project' => $project, 'zone' => $zone, 'instance' => $instance);
$params = array_merge($params, $optParams);
return $this->call('getShieldedInstanceIdentity', array($params), "Google_Service_Compute_ShieldedInstanceIdentity");
}
/**
* Creates an instance resource in the specified project using the data included
* in the request. (instances.insert)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param Google_Service_Compute_Instance $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @opt_param string sourceInstanceTemplate Specifies instance template to
* create the instance.
*
* This field is optional. It can be a full or partial URL. For example, the
* following are all valid URLs to an instance template: - https://www.googlea
* pis.com/compute/v1/projects/project/global/instanceTemplates/instanceTemplate
* - projects/project/global/instanceTemplates/instanceTemplate -
* global/instanceTemplates/instanceTemplate
* @return Google_Service_Compute_Operation
*/
public function insert($project, $zone, Google_Service_Compute_Instance $postBody, $optParams = array())
{
$params = array('project' => $project, 'zone' => $zone, 'postBody' => $postBody);
$params = array_merge($params, $optParams);
return $this->call('insert', array($params), "Google_Service_Compute_Operation");
}
/**
* Retrieves the list of instances contained within the specified zone.
* (instances.listInstances)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param array $optParams Optional parameters.
*
* @opt_param string filter A filter expression that filters resources listed in
* the response. The expression must specify the field name, a comparison
* operator, and the value that you want to use for filtering. The value must be
* a string, a number, or a boolean. The comparison operator must be either `=`,
* `!=`, `>`, or `<`.
*
* For example, if you are filtering Compute Engine instances, you can exclude
* instances named `example-instance` by specifying `name != example-instance`.
*
* You can also filter nested fields. For example, you could specify
* `scheduling.automaticRestart = false` to include instances only if they are
* not scheduled for automatic restarts. You can use filtering on nested fields
* to filter based on resource labels.
*
* To filter on multiple expressions, provide each separate expression within
* parentheses. For example: ``` (scheduling.automaticRestart = true)
* (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND`
* expression. However, you can include `AND` and `OR` expressions explicitly.
* For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel
* Broadwell") AND (scheduling.automaticRestart = true) ```
* @opt_param string maxResults The maximum number of results per page that
* should be returned. If the number of available results is larger than
* `maxResults`, Compute Engine returns a `nextPageToken` that can be used to
* get the next page of results in subsequent list requests. Acceptable values
* are `0` to `500`, inclusive. (Default: `500`)
* @opt_param string orderBy Sorts list results by a certain order. By default,
* results are returned in alphanumerical order based on the resource name.
*
* You can also sort results in descending order based on the creation timestamp
* using `orderBy="creationTimestamp desc"`. This sorts results based on the
* `creationTimestamp` field in reverse chronological order (newest result
* first). Use this to sort resources like operations so that the newest
* operation is returned first.
*
* Currently, only sorting by `name` or `creationTimestamp desc` is supported.
* @opt_param string pageToken Specifies a page token to use. Set `pageToken` to
* the `nextPageToken` returned by a previous list request to get the next page
* of results.
* @opt_param bool returnPartialSuccess Opt-in for partial success behavior
* which provides partial results in case of failure. The default value is
* false.
* @return Google_Service_Compute_InstanceList
*/
public function listInstances($project, $zone, $optParams = array())
{
$params = array('project' => $project, 'zone' => $zone);
$params = array_merge($params, $optParams);
return $this->call('list', array($params), "Google_Service_Compute_InstanceList");
}
/**
* Retrieves a list of resources that refer to the VM instance specified in the
* request. For example, if the VM instance is part of a managed or unmanaged
* instance group, the referrers list includes the instance group. For more
* information, read Viewing referrers to VM instances.
* (instances.listReferrers)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name of the target instance scoping this request, or
* '-' if the request should span over all instances in the container.
* @param array $optParams Optional parameters.
*
* @opt_param string filter A filter expression that filters resources listed in
* the response. The expression must specify the field name, a comparison
* operator, and the value that you want to use for filtering. The value must be
* a string, a number, or a boolean. The comparison operator must be either `=`,
* `!=`, `>`, or `<`.
*
* For example, if you are filtering Compute Engine instances, you can exclude
* instances named `example-instance` by specifying `name != example-instance`.
*
* You can also filter nested fields. For example, you could specify
* `scheduling.automaticRestart = false` to include instances only if they are
* not scheduled for automatic restarts. You can use filtering on nested fields
* to filter based on resource labels.
*
* To filter on multiple expressions, provide each separate expression within
* parentheses. For example: ``` (scheduling.automaticRestart = true)
* (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND`
* expression. However, you can include `AND` and `OR` expressions explicitly.
* For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel
* Broadwell") AND (scheduling.automaticRestart = true) ```
* @opt_param string maxResults The maximum number of results per page that
* should be returned. If the number of available results is larger than
* `maxResults`, Compute Engine returns a `nextPageToken` that can be used to
* get the next page of results in subsequent list requests. Acceptable values
* are `0` to `500`, inclusive. (Default: `500`)
* @opt_param string orderBy Sorts list results by a certain order. By default,
* results are returned in alphanumerical order based on the resource name.
*
* You can also sort results in descending order based on the creation timestamp
* using `orderBy="creationTimestamp desc"`. This sorts results based on the
* `creationTimestamp` field in reverse chronological order (newest result
* first). Use this to sort resources like operations so that the newest
* operation is returned first.
*
* Currently, only sorting by `name` or `creationTimestamp desc` is supported.
* @opt_param string pageToken Specifies a page token to use. Set `pageToken` to
* the `nextPageToken` returned by a previous list request to get the next page
* of results.
* @opt_param bool returnPartialSuccess Opt-in for partial success behavior
* which provides partial results in case of failure. The default value is
* false.
* @return Google_Service_Compute_InstanceListReferrers
*/
public function listReferrers($project, $zone, $instance, $optParams = array())
{
$params = array('project' => $project, 'zone' => $zone, 'instance' => $instance);
$params = array_merge($params, $optParams);
return $this->call('listReferrers', array($params), "Google_Service_Compute_InstanceListReferrers");
}
/**
* Removes resource policies from an instance.
* (instances.removeResourcePolicies)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance The instance name for this request.
* @param Google_Service_Compute_InstancesRemoveResourcePoliciesRequest $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Google_Service_Compute_Operation
*/
public function removeResourcePolicies($project, $zone, $instance, Google_Service_Compute_InstancesRemoveResourcePoliciesRequest $postBody, $optParams = array())
{
$params = array('project' => $project, 'zone' => $zone, 'instance' => $instance, 'postBody' => $postBody);
$params = array_merge($params, $optParams);
return $this->call('removeResourcePolicies', array($params), "Google_Service_Compute_Operation");
}
/**
* Performs a reset on the instance. This is a hard reset the VM does not do a
* graceful shutdown. For more information, see Resetting an instance.
* (instances.reset)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name of the instance scoping this request.
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Google_Service_Compute_Operation
*/
public function reset($project, $zone, $instance, $optParams = array())
{
$params = array('project' => $project, 'zone' => $zone, 'instance' => $instance);
$params = array_merge($params, $optParams);
return $this->call('reset', array($params), "Google_Service_Compute_Operation");
}
/**
* Sets deletion protection on the instance. (instances.setDeletionProtection)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $resource Name or id of the resource for this request.
* @param array $optParams Optional parameters.
*
* @opt_param bool deletionProtection Whether the resource should be protected
* against deletion.
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Google_Service_Compute_Operation
*/
public function setDeletionProtection($project, $zone, $resource, $optParams = array())
{
$params = array('project' => $project, 'zone' => $zone, 'resource' => $resource);
$params = array_merge($params, $optParams);
return $this->call('setDeletionProtection', array($params), "Google_Service_Compute_Operation");
}
/**
* Sets the auto-delete flag for a disk attached to an instance.
* (instances.setDiskAutoDelete)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance The instance name for this request.
* @param bool $autoDelete Whether to auto-delete the disk when the instance is
* deleted.
* @param string $deviceName The device name of the disk to modify. Make a get()
* request on the instance to view currently attached disks and device names.
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Google_Service_Compute_Operation
*/
public function setDiskAutoDelete($project, $zone, $instance, $autoDelete, $deviceName, $optParams = array())
{
$params = array('project' => $project, 'zone' => $zone, 'instance' => $instance, 'autoDelete' => $autoDelete, 'deviceName' => $deviceName);
$params = array_merge($params, $optParams);
return $this->call('setDiskAutoDelete', array($params), "Google_Service_Compute_Operation");
}
/**
* Sets the access control policy on the specified resource. Replaces any
* existing policy. (instances.setIamPolicy)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $resource Name or id of the resource for this request.
* @param Google_Service_Compute_ZoneSetPolicyRequest $postBody
* @param array $optParams Optional parameters.
* @return Google_Service_Compute_Policy
*/
public function setIamPolicy($project, $zone, $resource, Google_Service_Compute_ZoneSetPolicyRequest $postBody, $optParams = array())
{
$params = array('project' => $project, 'zone' => $zone, 'resource' => $resource, 'postBody' => $postBody);
$params = array_merge($params, $optParams);
return $this->call('setIamPolicy', array($params), "Google_Service_Compute_Policy");
}
/**
* Sets labels on an instance. To learn more about labels, read the Labeling
* Resources documentation. (instances.setLabels)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name of the instance scoping this request.
* @param Google_Service_Compute_InstancesSetLabelsRequest $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Google_Service_Compute_Operation
*/
public function setLabels($project, $zone, $instance, Google_Service_Compute_InstancesSetLabelsRequest $postBody, $optParams = array())
{
$params = array('project' => $project, 'zone' => $zone, 'instance' => $instance, 'postBody' => $postBody);
$params = array_merge($params, $optParams);
return $this->call('setLabels', array($params), "Google_Service_Compute_Operation");
}
/**
* Changes the number and/or type of accelerator for a stopped instance to the
* values specified in the request. (instances.setMachineResources)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name of the instance scoping this request.
* @param Google_Service_Compute_InstancesSetMachineResourcesRequest $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Google_Service_Compute_Operation
*/
public function setMachineResources($project, $zone, $instance, Google_Service_Compute_InstancesSetMachineResourcesRequest $postBody, $optParams = array())
{
$params = array('project' => $project, 'zone' => $zone, 'instance' => $instance, 'postBody' => $postBody);
$params = array_merge($params, $optParams);
return $this->call('setMachineResources', array($params), "Google_Service_Compute_Operation");
}
/**
* Changes the machine type for a stopped instance to the machine type specified
* in the request. (instances.setMachineType)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name of the instance scoping this request.
* @param Google_Service_Compute_InstancesSetMachineTypeRequest $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Google_Service_Compute_Operation
*/
public function setMachineType($project, $zone, $instance, Google_Service_Compute_InstancesSetMachineTypeRequest $postBody, $optParams = array())
{
$params = array('project' => $project, 'zone' => $zone, 'instance' => $instance, 'postBody' => $postBody);
$params = array_merge($params, $optParams);
return $this->call('setMachineType', array($params), "Google_Service_Compute_Operation");
}
/**
* Sets metadata for the specified instance to the data included in the request.
* (instances.setMetadata)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name of the instance scoping this request.
* @param Google_Service_Compute_Metadata $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Google_Service_Compute_Operation
*/
public function setMetadata($project, $zone, $instance, Google_Service_Compute_Metadata $postBody, $optParams = array())
{
$params = array('project' => $project, 'zone' => $zone, 'instance' => $instance, 'postBody' => $postBody);
$params = array_merge($params, $optParams);
return $this->call('setMetadata', array($params), "Google_Service_Compute_Operation");
}
/**
* Changes the minimum CPU platform that this instance should use. This method
* can only be called on a stopped instance. For more information, read
* Specifying a Minimum CPU Platform. (instances.setMinCpuPlatform)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name of the instance scoping this request.
* @param Google_Service_Compute_InstancesSetMinCpuPlatformRequest $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Google_Service_Compute_Operation
*/
public function setMinCpuPlatform($project, $zone, $instance, Google_Service_Compute_InstancesSetMinCpuPlatformRequest $postBody, $optParams = array())
{
$params = array('project' => $project, 'zone' => $zone, 'instance' => $instance, 'postBody' => $postBody);
$params = array_merge($params, $optParams);
return $this->call('setMinCpuPlatform', array($params), "Google_Service_Compute_Operation");
}
/**
* Sets an instance's scheduling options. You can only call this method on a
* stopped instance, that is, a VM instance that is in a `TERMINATED` state. See
* Instance Life Cycle for more information on the possible instance states.
* (instances.setScheduling)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Instance name for this request.
* @param Google_Service_Compute_Scheduling $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Google_Service_Compute_Operation
*/
public function setScheduling($project, $zone, $instance, Google_Service_Compute_Scheduling $postBody, $optParams = array())
{
$params = array('project' => $project, 'zone' => $zone, 'instance' => $instance, 'postBody' => $postBody);
$params = array_merge($params, $optParams);
return $this->call('setScheduling', array($params), "Google_Service_Compute_Operation");
}
/**
* Sets the service account on the instance. For more information, read Changing
* the service account and access scopes for an instance.
* (instances.setServiceAccount)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name of the instance resource to start.
* @param Google_Service_Compute_InstancesSetServiceAccountRequest $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Google_Service_Compute_Operation
*/
public function setServiceAccount($project, $zone, $instance, Google_Service_Compute_InstancesSetServiceAccountRequest $postBody, $optParams = array())
{
$params = array('project' => $project, 'zone' => $zone, 'instance' => $instance, 'postBody' => $postBody);
$params = array_merge($params, $optParams);
return $this->call('setServiceAccount', array($params), "Google_Service_Compute_Operation");
}
/**
* Sets the Shielded Instance integrity policy for an instance. You can only use
* this method on a running instance. This method supports PATCH semantics and
* uses the JSON merge patch format and processing rules.
* (instances.setShieldedInstanceIntegrityPolicy)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name or id of the instance scoping this request.
* @param Google_Service_Compute_ShieldedInstanceIntegrityPolicy $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Google_Service_Compute_Operation
*/
public function setShieldedInstanceIntegrityPolicy($project, $zone, $instance, Google_Service_Compute_ShieldedInstanceIntegrityPolicy $postBody, $optParams = array())
{
$params = array('project' => $project, 'zone' => $zone, 'instance' => $instance, 'postBody' => $postBody);
$params = array_merge($params, $optParams);
return $this->call('setShieldedInstanceIntegrityPolicy', array($params), "Google_Service_Compute_Operation");
}
/**
* Sets network tags for the specified instance to the data included in the
* request. (instances.setTags)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name of the instance scoping this request.
* @param Google_Service_Compute_Tags $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Google_Service_Compute_Operation
*/
public function setTags($project, $zone, $instance, Google_Service_Compute_Tags $postBody, $optParams = array())
{
$params = array('project' => $project, 'zone' => $zone, 'instance' => $instance, 'postBody' => $postBody);
$params = array_merge($params, $optParams);
return $this->call('setTags', array($params), "Google_Service_Compute_Operation");
}
/**
* Simulates a maintenance event on the instance.
* (instances.simulateMaintenanceEvent)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name of the instance scoping this request.
* @param array $optParams Optional parameters.
* @return Google_Service_Compute_Operation
*/
public function simulateMaintenanceEvent($project, $zone, $instance, $optParams = array())
{
$params = array('project' => $project, 'zone' => $zone, 'instance' => $instance);
$params = array_merge($params, $optParams);
return $this->call('simulateMaintenanceEvent', array($params), "Google_Service_Compute_Operation");
}
/**
* Starts an instance that was stopped using the instances().stop method. For
* more information, see Restart an instance. (instances.start)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name of the instance resource to start.
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Google_Service_Compute_Operation
*/
public function start($project, $zone, $instance, $optParams = array())
{
$params = array('project' => $project, 'zone' => $zone, 'instance' => $instance);
$params = array_merge($params, $optParams);
return $this->call('start', array($params), "Google_Service_Compute_Operation");
}
/**
* Starts an instance that was stopped using the instances().stop method. For
* more information, see Restart an instance. (instances.startWithEncryptionKey)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name of the instance resource to start.
* @param Google_Service_Compute_InstancesStartWithEncryptionKeyRequest $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Google_Service_Compute_Operation
*/
public function startWithEncryptionKey($project, $zone, $instance, Google_Service_Compute_InstancesStartWithEncryptionKeyRequest $postBody, $optParams = array())
{
$params = array('project' => $project, 'zone' => $zone, 'instance' => $instance, 'postBody' => $postBody);
$params = array_merge($params, $optParams);
return $this->call('startWithEncryptionKey', array($params), "Google_Service_Compute_Operation");
}
/**
* Stops a running instance, shutting it down cleanly, and allows you to restart
* the instance at a later time. Stopped instances do not incur VM usage charges
* while they are stopped. However, resources that the VM is using, such as
* persistent disks and static IP addresses, will continue to be charged until
* they are deleted. For more information, see Stopping an instance.
* (instances.stop)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name of the instance resource to stop.
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Google_Service_Compute_Operation
*/
public function stop($project, $zone, $instance, $optParams = array())
{
$params = array('project' => $project, 'zone' => $zone, 'instance' => $instance);
$params = array_merge($params, $optParams);
return $this->call('stop', array($params), "Google_Service_Compute_Operation");
}
/**
* Returns permissions that a caller has on the specified resource.
* (instances.testIamPermissions)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $resource Name or id of the resource for this request.
* @param Google_Service_Compute_TestPermissionsRequest $postBody
* @param array $optParams Optional parameters.
* @return Google_Service_Compute_TestPermissionsResponse
*/
public function testIamPermissions($project, $zone, $resource, Google_Service_Compute_TestPermissionsRequest $postBody, $optParams = array())
{
$params = array('project' => $project, 'zone' => $zone, 'resource' => $resource, 'postBody' => $postBody);
$params = array_merge($params, $optParams);
return $this->call('testIamPermissions', array($params), "Google_Service_Compute_TestPermissionsResponse");
}
/**
* Updates an instance only if the necessary resources are available. This
* method can update only a specific set of instance properties. See Updating a
* running instance for a list of updatable instance properties.
* (instances.update)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name of the instance resource to update.
* @param Google_Service_Compute_Instance $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string minimalAction Specifies the action to take when updating an
* instance even if the updated properties do not require it. If not specified,
* then Compute Engine acts based on the minimum action that the updated
* properties require.
* @opt_param string mostDisruptiveAllowedAction Specifies the most disruptive
* action that can be taken on the instance as part of the update. Compute
* Engine returns an error if the instance properties require a more disruptive
* action as part of the instance update. Valid options from lowest to highest
* are NO_EFFECT, REFRESH, and RESTART.
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Google_Service_Compute_Operation
*/
public function update($project, $zone, $instance, Google_Service_Compute_Instance $postBody, $optParams = array())
{
$params = array('project' => $project, 'zone' => $zone, 'instance' => $instance, 'postBody' => $postBody);
$params = array_merge($params, $optParams);
return $this->call('update', array($params), "Google_Service_Compute_Operation");
}
/**
* Updates the specified access config from an instance's network interface with
* the data included in the request. This method supports PATCH semantics and
* uses the JSON merge patch format and processing rules.
* (instances.updateAccessConfig)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance The instance name for this request.
* @param string $networkInterface The name of the network interface where the
* access config is attached.
* @param Google_Service_Compute_AccessConfig $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Google_Service_Compute_Operation
*/
public function updateAccessConfig($project, $zone, $instance, $networkInterface, Google_Service_Compute_AccessConfig $postBody, $optParams = array())
{
$params = array('project' => $project, 'zone' => $zone, 'instance' => $instance, 'networkInterface' => $networkInterface, 'postBody' => $postBody);
$params = array_merge($params, $optParams);
return $this->call('updateAccessConfig', array($params), "Google_Service_Compute_Operation");
}
/**
* Updates the Display config for a VM instance. You can only use this method on
* a stopped VM instance. This method supports PATCH semantics and uses the JSON
* merge patch format and processing rules. (instances.updateDisplayDevice)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name of the instance scoping this request.
* @param Google_Service_Compute_DisplayDevice $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Google_Service_Compute_Operation
*/
public function updateDisplayDevice($project, $zone, $instance, Google_Service_Compute_DisplayDevice $postBody, $optParams = array())
{
$params = array('project' => $project, 'zone' => $zone, 'instance' => $instance, 'postBody' => $postBody);
$params = array_merge($params, $optParams);
return $this->call('updateDisplayDevice', array($params), "Google_Service_Compute_Operation");
}
/**
* Updates an instance's network interface. This method can only update an
* interface's alias IP range and attached network. See Modifying alias IP
* ranges for an existing instance for instructions on changing alias IP ranges.
* See Migrating a VM between networks for instructions on migrating an
* interface. This method follows PATCH semantics.
* (instances.updateNetworkInterface)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance The instance name for this request.
* @param string $networkInterface The name of the network interface to update.
* @param Google_Service_Compute_NetworkInterface $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Google_Service_Compute_Operation
*/
public function updateNetworkInterface($project, $zone, $instance, $networkInterface, Google_Service_Compute_NetworkInterface $postBody, $optParams = array())
{
$params = array('project' => $project, 'zone' => $zone, 'instance' => $instance, 'networkInterface' => $networkInterface, 'postBody' => $postBody);
$params = array_merge($params, $optParams);
return $this->call('updateNetworkInterface', array($params), "Google_Service_Compute_Operation");
}
/**
* Updates the Shielded Instance config for an instance. You can only use this
* method on a stopped instance. This method supports PATCH semantics and uses
* the JSON merge patch format and processing rules.
* (instances.updateShieldedInstanceConfig)
*
* @param string $project Project ID for this request.
* @param string $zone The name of the zone for this request.
* @param string $instance Name or id of the instance scoping this request.
* @param Google_Service_Compute_ShieldedInstanceConfig $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed.
*
* For example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments.
*
* The request ID must be a valid UUID with the exception that zero UUID is not
* supported (00000000-0000-0000-0000-000000000000).
* @return Google_Service_Compute_Operation
*/
public function updateShieldedInstanceConfig($project, $zone, $instance, Google_Service_Compute_ShieldedInstanceConfig $postBody, $optParams = array())
{
$params = array('project' => $project, 'zone' => $zone, 'instance' => $instance, 'postBody' => $postBody);
$params = array_merge($params, $optParams);
return $this->call('updateShieldedInstanceConfig', array($params), "Google_Service_Compute_Operation");
}
}
|