Software: Apache/2.4.41 (Ubuntu). PHP/8.0.30 

uname -a: Linux apirnd 5.4.0-204-generic #224-Ubuntu SMP Thu Dec 5 13:38:28 UTC 2024 x86_64 

uid=33(www-data) gid=33(www-data) groups=33(www-data) 

Safe-mode: OFF (not secure)

/etc/sane.d/   drwxr-xr-x
Free 13.03 GB of 57.97 GB (22.49%)
                            Encoder    Tools    Proc.    FTP brute    Sec.    SQL    PHP-code    Update    Self remove    Logout    

Viewing file:     magicolor.conf (1.22 KB)      -rw-r--r--

### magicolor.conf
###
### here are some examples for how to configure the Magicolor backend

### Timeout settings: SNMP autodetection, Scan data read requests and other
###                   read requests. All values are given in milliseconds,
###                   i.e. 1000 is 1 second.

# SNMP auto-detection waits 1.5 seconds
snmp-timeout 1500

# wait 15 seconds for scan data (color scans take ~6 seconds to initialize,
# so we need to wait longer than that)
scan-data-timeout 15000

# Wait 5 seconds for all other data requests
request-timeout 5000


### Network: Format is "net IP_ADDRESS [USB_ID]" or "net autodiscovery"
###          if USB_ID is left out, SNMP is used to detect the device type

net autodiscovery
#net 10.0.0.5

### The following is a magicolor 1690mf with explicit IP-Address
#net 10.0.0.5 0x2098
# net 192.168.0.1

### USB: format is "usb" for automatic (libusb) discovery, based on USB IDs,
###      or "usb <vendor ID> <device ID> to force the use of a particular
###      device (the backend has some additional checks and will not use
###      non-KONICA MINOLTA devices, though)

usb

### For libusb support for unknown scanners use the following command
### usb <product ID> <device ID>
### e.g.:

# usb 0x132b 0x2098